Jan
18

Best Way To Clean Clogged Shower Head

Author redlaw    Category Shower Head     Tags , ,

Do you want to keep informed about what is taking place in this subject? Do you desire to be the very first in line concerning the advancements on shower head cleaning? Are you anxious to get current information?

Do not be satisfied with news which is old! We’ve got the hottest info on this subject. Any time you sign up for either our email list or RSS feed you get the newest info right away.

If you notice discolouration on your shower head (chalky white, green or brown), you’ve got some for of calcium, limescale or rust. While it’s not a health risk, it means your shower head’s performance is going to be sluggish, leaving you with a less than exciting shower experience. Here’s what to do.

Fill the bag half way with vinegar and secure it to the shower head, a-la getting a fish at the pet store. Leave it for 12 hours (24 if it’s terrible) to soak and ensure that the entire shower head is immersed in vinegar. The vinegar will power through any limescale and you’ll notice a big difference in your shower’s performance.

If you don’t feel up to the task of removing the shower head to clean it, or for some reason you cannot remove your shower head, you can still effectively clean the mineral buildup off your shower head while it is on the shower arm. Be aware, however, that usually this method will take quite a bit longer since you don’t heat the vinegar.

Many brands make sprays specially designed to remove limescale. If you’ve got a heavy build-up that is proving resistant to vinegar, then your local supermarket will most likely stock an array of sprays that will do the job. However, be careful when using these that you don’t spray overhead and accidentally get chemicals in your eyes.

Cleaning limescale from shower heads with white vinegar is a good way to remove all that nasty buildup! However, using vinegar can take a few hours to have the maximum effect, so you may prefer to use a specialist cleaning product, like Cif Bathroom Spray. Whichever product you use, make sure to follow the directions on the label and test it in a small area first. You will also want to rinse the product thoroughly before using the shower as normal.

Occasionally when we lived in London, we would put a couple of bags of washing soda in the water tank in the loft (hot water) and let it sit there overnight then let it run through the system, it really kept the limescale down, I used to do all my washing with that water on a saturday or sunday morning, the old fart would swap the washing maching hoses over so the machine filled with hot water then put them back, id do all thecurtains and bedding and towels etc then our clothes and by that time the washing soda had gone and we could get baths etc

Secure the bag to the showerhead with a piece of string or twist tie. You can do this by holding the top of the bag tightly around the neck of the showerhead, and then tying a piece of string or a twist tie tightly around it. Carefully let go of the bag and make sure that it won’t fall off before stepping away.

If you have a fixed shower head, make up the same solution of distilled white vinegar and water and half fill the plastic bag. Place the bag over the shower head, ensuring the whole head is submerged. Tie the bag securely on to the pipe behind the head with an elastic band or some hard-wearing string. Again, leave it overnight, then pour some fresh, soapy water over it to rinse it.

Begin this how to clean showerheads project by unscrewing the showerhead by gripping the shower neck with a pipe wrench (as shown), grabbing the nut on the showerhead with the adjustable pliers and turning pliers counterclockwise until the nut loosens. Protect the finishes on the showerhead and wall pipe by wrapping them with a cloth.

You can use these products to make the cleaning a lot faster:

Take a soft cloth and polish the shower head, wipe until dry and there are no water spots. The shower head can then be screwed back onto the hose. Turn on the shower to flush out any residue the toothbrush didn’t get.

Showerheads can collect all kinds of mold, mildew and bacteria, so it is important to clean them at least once a month. And, it’s easy to clean your showerhead using one household ingredient and a couple other items from around your home. Follow this easy way to clean your showerhead in just 30 minutes.

The problem comes from hard water which is entering your home and aside from installing a water softener, you have few options when it comes to preventing the build up of limescale on and in your appliances. Hard water isn’t harmful, so showering under the water won’t hurt you, but you may find it irritating once the holes are blocked and you will find that shower hoses and shower heads will need to be replaced on a regular basis.

A quick internet search on how to descale any household object will nearly always lead to white vinegar. Even sensitive items like sterilisers for baby bottles are in safe hands. When using vinegar to descale a shower head, the first thing to get right is the type of vinegar. Malt vinegar isn’t particularly effective and brown vinegar may stain, so white distilled vinegar is best.

Post comment