Jan
18

Best Way To Clean Shower Head Without Vinegar

Author redlaw    Category Shower Head     Tags , , ,

What’s keeping you from making a key decision concerning shower head cleaning? Is it your lack of information regarding this subject ? You are not the only one. This occurs all of the time – you have to decide something however do not think that you understand enough. I recently discovered this article below and it talks about this subject in more detail than I have read before.

Not just did it list everything I was looking for but it told me what I really should be careful of as well. If one makes the wrong decision because you didn’t have all of the info you needed it is going to be the wrong decision. This informative article helped me – it can easily help you also!

Many brands make sprays specially designed to remove limescale. If you’ve got a heavy build-up that is proving resistant to vinegar, then your local supermarket will most likely stock an array of sprays that will do the job. However, be careful when using these that you don’t spray overhead and accidentally get chemicals in your eyes.

Many cleaning products are specifically designed to combat limescale, and these products are easy to use (and often take much less time than the vinegar method!). Just follow the directions on the label, take any necessary safety precautions, and test the product in a small area first before proceeding. Make sure to rinse the shower head thoroughly before using the shower as normal.

Disconnect the showerhead. To disconnect the showerhead, unscrew the nut at the shower arm. Take care not to mar the fixture’s finish. Use a wrench rather than pliers. Cushion your tool with a rag while you work.

If you can’t remove your showerhead or simply want to skip that step, you can soak your showerhead by using a rubber band and a plastic bag. (Note: This method is best for showerheads made with chrome, stainless steel, or other protected metal surfaces.)

First, make sure to avoid contact with the eyes. If any vinegar gets in your eyes, promptly rinse the entire eye with fresh water until the sting has completely dissipated. Also, although it’s safe to use vinegar to clean areas where children play, you will want to do so when they are not present. Like adults, children should not be consuming vinegar in any way. 

Does anyone know a fool proof way of descaling a shower head? We’ve only been in our house for 2 weeks and it’s building up! The shower bit is one of those tap adaptor things, so not the most expensive of things – and I can’t take it apart to clean it.

Many shower heads have flexible rubber nozzles. You can dislodge mineral buildup in these nozzles by simply massaging each nozzle with your finger. You can also try gently scrubbing the nozzles with a toothbrush.

OK, 12 hours has passed…carefully remove the bag and dump the vinegar down the drain. If you want to clean your drain in the process, dump some baking soda down the drain before pouring out the vinegar and your drain will get cleaned as well. Once the vinegar is emptied, run the shower for a minute and let the vinegar rinse off (the smell will go away too). Within minutes your shower will work wonderfully and you’ll be so glad you tried this out!

Don’t use baking soda. Sometimes it will clump up if there’s water in your showerhead. Just use the vinegar. It’s the best way. If you need to, flush out the showerhead with hot water and repeat the process until it’s clean. It may take a few times if you have mineral build up. It’s especially bad with well water.

A quick internet search on how to descale any household object will nearly always lead to white vinegar. Even sensitive items like sterilisers for baby bottles are in safe hands. When using vinegar to descale a shower head, the first thing to get right is the type of vinegar. Malt vinegar isn’t particularly effective and brown vinegar may stain, so white distilled vinegar is best.

Secure the bag to the showerhead with a piece of string or twist tie. You can do this by holding the top of the bag tightly around the neck of the showerhead, and then tying a piece of string or a twist tie tightly around it. Carefully let go of the bag and make sure that it won’t fall off before stepping away.

If there’s a tough spot that plain vinegar won’t remove, try scrubbing it with a paste made from 2 tablespoons of salt and 1 teaspoon of white vinegar.[7] This is not recommended for showerheads with delicate finishes; the salt may scratch the finish.

Scrub the showerhead using an old toothbrush, then turn the water back on. Focus on the base of the showerhead, where the water comes out, as this is the area that will get the most buildup. Turn the water back on again to flush more residue out. Keep scrubbing the showerhead and turning the water on until you cannot see anymore mineral residue.

You can use these professional products to make the process a lot faster:

Not all showerheads are removable, meaning that descaling a fixed shower head can seem a bit trickier than an adjustable one. However, as with any problem that involves limescale, your first port of call should always be vinegar.

Keeping on top of the cleaning of your showerhead is important. The process of soaking in vinegar should be repeated every week during your general bathroom clean. This will mean that the problem will not have a chance to take hold. Once the initial clean has been done, a few minutes of soaking should be enough to keep on top of it if done regularly.

Occasionally when we lived in London, we would put a couple of bags of washing soda in the water tank in the loft (hot water) and let it sit there overnight then let it run through the system, it really kept the limescale down, I used to do all my washing with that water on a saturday or sunday morning, the old fart would swap the washing maching hoses over so the machine filled with hot water then put them back, id do all thecurtains and bedding and towels etc then our clothes and by that time the washing soda had gone and we could get baths etc

Rinse the showerhead. Run a sharp blast of water through the showerhead by holding it upside down underneath a faucet. Your goal is to rinse loosened debris out through the opening that connects to the shower arm.

Allen Shulman is a veteran Colorado homebuilder, proud dad, and floor hockey enthusiast. He founded BrightNest, a Denver-based business that gives people the online tools, tips and motivation to keep their homes in great shape.

Residue can be scrubbed away with an old toothbrush. Focus on the nozzles, this is where most of the limescale build-up will be. Gently scrub over any residue and rinse with cold water. Do this until all the residue has gone.

Over time, hard-water minerals in tap water build up and clog the spray holes in showerheads. Fix this problem by removing the showerhead and cleaning it. Buy a lime removing product to loosen the scale, or soak the head overnight in vinegar (either white or apple cider). Check the owner’s manual or manufacturer’s website to confirm that vinegar won’t harm the finish.

The acetic acid in white vinegar acts as a solvent, which helps dissolve the mineral deposits hogging space in your showerhead’s passageways. Allowing your showerhead to bask in vinegar for an hour or more will help dissolve the buildup so that it washes away once the shower is turned on. 

We think it’s important you understand the strengths and limitations of the site. We’re a journalistic website and aim to provide the best MoneySaving guides, tips, tools and techniques, but can’t guarantee to be perfect, so do note you use the information at your own risk and we can’t accept liability if things go wrong.

Remove the showerhead by twisting it counterclockwise. If you are having difficulties twisting it, try wrapping an old rag around the connecting nut, and then twisting it with a wrench. The rag will help protect the surface of your showerhead.[1]

Showerheads can collect all kinds of mold, mildew and bacteria, so it is important to clean them at least once a month. And, it’s easy to clean your showerhead using one household ingredient and a couple other items from around your home. Follow this easy way to clean your showerhead in just 30 minutes.

Showerheads often spray unevenly because their tiny holes have gotten plugged with mineral deposits. In order for water to flow freely, you need to remove these deposits. To do that, you may want to soak the showerhead in vinegar. And that may mean removing the showerhead from the shower arm.

If you find your shower head looking dingy, you’re losing spray power, or there’s random jets shooting all over, it’s probably time to clean your shower head. Even if you don’t have hard water, many people experience a build up of mineral deposits on their shower head after a while. Aside from making your shower head look dirty, these deposits can often times block the jet openings on the shower head preventing it from producing the desired spray. A good soak and scrub can eliminate this in just a few minutes. But, before reaching for a harsh, toxic chemical to clean your shower head, consider using a more eco-friendly cleaning method.

You can prevent some buildup on the surfaces in your bathroom by keeping your shower and tub clean and by using a squeegee or dry towel to remove water after a shower or bath. Keeping the areas free of soap scum (residue left behind from certain types of soap combined with hard water deposits) will allow the minerals in your water to wash down the drain rather than stick to the soap scum.

Please note: The information provided here is intended to give a basic knowledge of plumbing related cleaning methods. This information is general, and may not suit all applications. If you are at all unsure of your abilities to complete one of these projects, please consult a professional.

Post comment