Feb
10

Clean Blocked Shower Head

Author redlaw    Category Shower Head     Tags , ,

Have you been having a great day? I am! If you are looking for a one stop place for information, including everything from pictures to reports, then you are in the best place – shower head cleaning blog. Everything you could ever need is below at your convenience. There is a complete variety of resources that are ready to be discovered. Feel free to proceed reading and browse more well written articles like the 1 below. Experience the advantages of our specialists in shower head cleaning and begin.

Remove the shower head from the shower arm and place it in a bucket or other container deep enough so the head will be covered with the cleaning material. Use a rag to cover the nut connecting the shower head to the shower arm. With the rag in place use some locking pliers or a wrench to loosen the nut. For more information about removing your shower head, view how to remove/replace a shower head.

Is your showerhead blocked by unsightly calcium deposits? “Hard” water, particularly from wells, can be high in calcium, magnesium, lime, silica and other minerals. Once hard water passing through a showerhead dries, it leaves behind deposits. This mineral buildup is both unattractive and problematic, as it can plug up the waterways and prevent your shower from flowing at full blast.

Secure the bag to the showerhead with a piece of string or twist tie. You can do this by holding the top of the bag tightly around the neck of the showerhead, and then tying a piece of string or a twist tie tightly around it. Carefully let go of the bag and make sure that it won’t fall off before stepping away.

Remove the showerhead by twisting it counterclockwise. If you are having difficulties twisting it, try wrapping an old rag around the connecting nut, and then twisting it with a wrench. The rag will help protect the surface of your showerhead.[1]

You can use these products to make the job muchfaster & easier:

If there is one thing which is annoying it is having a shower with the water squirting out in every direction but down. The water is being squeezed through the holes in your showerhead which have become clogged with limescale and no matter how much you try to fix the problem by wiping the showerhead you find the situation only gets worse.

Important Note! Harsh cleaning chemicals may damage your shower head and are not recommended for cleaning. (Read our blog post for some great money-saving tips for cleaning showers without expensive, harsh chemicals.)

I use distilled vinegar, before I cottoned on to buying it in 5 gallon cartons from the cash & carry I used to use Sarsons distilled but it was very expensive. In an emergency I have used malt vinegar but the smell did not seem to evaporate nearly as much as distilled when it dried.

When vinegar just won’t do the job, you can use a commercial limescale remover like Cif Bathroom Spray. These are specially designed to be relentless on tough limescale stains so you can clean your shower head quickly with minimal effort! Just follow the directions on the label.

Keeping on top of the cleaning of your showerhead is important. The process of soaking in vinegar should be repeated every week during your general bathroom clean. This will mean that the problem will not have a chance to take hold. Once the initial clean has been done, a few minutes of soaking should be enough to keep on top of it if done regularly.

If you don’t feel up to the task of removing the shower head to clean it, or for some reason you cannot remove your shower head, you can still effectively clean the mineral buildup off your shower head while it is on the shower arm. Be aware, however, that usually this method will take quite a bit longer since you don’t heat the vinegar.

If you find your shower head looking dingy, you’re losing spray power, or there’s random jets shooting all over, it’s probably time to clean your shower head. Even if you don’t have hard water, many people experience a build up of mineral deposits on their shower head after a while. Aside from making your shower head look dirty, these deposits can often times block the jet openings on the shower head preventing it from producing the desired spray. A good soak and scrub can eliminate this in just a few minutes. But, before reaching for a harsh, toxic chemical to clean your shower head, consider using a more eco-friendly cleaning method.

Begin this how to clean showerheads project by unscrewing the showerhead by gripping the shower neck with a pipe wrench (as shown), grabbing the nut on the showerhead with the adjustable pliers and turning pliers counterclockwise until the nut loosens. Protect the finishes on the showerhead and wall pipe by wrapping them with a cloth.

Many brands make sprays specially designed to remove limescale. If you’ve got a heavy build-up that is proving resistant to vinegar, then your local supermarket will most likely stock an array of sprays that will do the job. However, be careful when using these that you don’t spray overhead and accidentally get chemicals in your eyes.

How do I put washing soda in the machine? With the soap (we use the Faith in Nature liquid thingy – bought in bulk of course hehe) or in the conditioner space (we don’t use any conditioner, find it a waste of time and money and we like our towels ROUGH!!). Can this be done to the dishwasher as well?

We think it’s important you understand the strengths and limitations of the site. We’re a journalistic website and aim to provide the best MoneySaving guides, tips, tools and techniques, but can’t guarantee to be perfect, so do note you use the information at your own risk and we can’t accept liability if things go wrong.

The same hard water that clogs up your showerhead can leave off-white or brown spots on glass or ceramic surfaces, particularly in bathrooms and kitchens. Sinks, tubs, and glass shower walls and doors are all common places for mineral deposits to collect. Although it’s not as problematic as a clogged showerhead, it’s still unattractive. Rinsing the area with a solution that’s half vinegar, half water will eliminate such spots. The solution can be mixed in a spray bottle and sprayed directly onto the affected area. Wipe it away with a soft cloth or sponge. 

Use a soft cloth to polish the showerhead.[3] You can use a microfiber cloth or even a piece of flannel. Gently wipe the showerhead with the cloth until it is completely dry and there are no water spots.[4]

Please note: The information provided here is intended to give a basic knowledge of plumbing related cleaning methods. This information is general, and may not suit all applications. If you are at all unsure of your abilities to complete one of these projects, please consult a professional.

If you have a severe problem with limescale you can use a chemical limescale remover. Use the same methods as above, but take care to read the instructions as some materials can be ruined by the use of certain cleaners. Don’t soak for too long as these harsher chemicals will reduce the time it takes to dissolve deposits. You should also take care to rinse the showerhead completely before using the shower.

Kettles, irons, showerheads: anything that comes into regular contact with hard water will inevitably lead to limescale. And as limescale builds up, showerheads get blocked, affecting the water flow and taking the shine off your shower. But descaling a shower head doesn’t have to be a difficult chore.

Shower heads are extremely prone to a buildup of limescale, which can prevent the water from flowing correctly. Fortunately, if you need to clean limescale from your shower head, it will only take a few hours – and only a few minutes of cleaning effort from you! Below are the following steps that can be taken to clean shower heads, leaving them spotless and limescale-free.

Post comment