Jan
24

How To Clean A Plastic Shower Head

Author redlaw    Category Shower Head     Tags , ,

The shower head cleaning blog was produced to be a center of all of the fans as well as the experts to deliver beneficial information for the newcomers. This blog has developed into a one stop library on shower head cleaning .

Lots of readers have voted this site to be a rather good place to start when learning about this. We’re an on-line collection filled with all types of amazing resources.

You can use these products to make the cleaning a lot easier:

Use some tape, or if your shower head is small enough you can use a rubber band, and secure the bag around the shower head. Keep the tape on the plastic! Tape is really hard to remove from metal surfaces and may damage the finish of your shower arm or head.

Showerheads can collect all kinds of mold, mildew and bacteria, so it is important to clean them at least once a month. And, it’s easy to clean your showerhead using one household ingredient and a couple other items from around your home. Follow this easy way to clean your showerhead in just 30 minutes.

You can prevent some buildup on the surfaces in your bathroom by keeping your shower and tub clean and by using a squeegee or dry towel to remove water after a shower or bath. Keeping the areas free of soap scum (residue left behind from certain types of soap combined with hard water deposits) will allow the minerals in your water to wash down the drain rather than stick to the soap scum.

Just fill a small plastic bag half full with white vinegar and attach the bag over your showerhead with a rubber band. Leave the bag in place for an hour or two. Then remove the bag and scrub the showerhead with an old toothbrush or rag. Your showerhead will look and function like new!

It is unusual to find showerheads which cannot be removed from their fittings, but if yours is one of the few, you can still clean it of limescale. Fill a plastic bag with vinegar and tie it securely with a rubber band around the showerhead. Make sure it is fully immersed. Once again leave it overnight and then run the shower to see how clean it is. The video above shows exactly how to do this.

Important Note! Harsh cleaning chemicals may damage your shower head and are not recommended for cleaning. (Read our blog post for some great money-saving tips for cleaning showers without expensive, harsh chemicals.)

Most people would agree that they would rather not use harsh chemicals close to their skin and so vinegar is a great option for clearing your showerhead of limescale. If your showerhead can be unscrewed from the hose or wall fitting you should do so. Then immerse the showerhead in a bowl full of vinegar. Take it apart as much as possible – some models allow you to unscrew the front section. Leave it overnight and then rinse thoroughly with water until the water runs smoothly through the holes. You may need to use a pin to unblock the holes.

Allen Shulman is a veteran Colorado homebuilder, proud dad, and floor hockey enthusiast. He founded BrightNest, a Denver-based business that gives people the online tools, tips and motivation to keep their homes in great shape.

Many cleaning products are specifically designed to combat limescale, and these products are easy to use (and often take much less time than the vinegar method!). Just follow the directions on the label, take any necessary safety precautions, and test the product in a small area first before proceeding. Make sure to rinse the shower head thoroughly before using the shower as normal.

If you don’t feel up to the task of removing the shower head to clean it, or for some reason you cannot remove your shower head, you can still effectively clean the mineral buildup off your shower head while it is on the shower arm. Be aware, however, that usually this method will take quite a bit longer since you don’t heat the vinegar.

I use distilled vinegar, before I cottoned on to buying it in 5 gallon cartons from the cash & carry I used to use Sarsons distilled but it was very expensive. In an emergency I have used malt vinegar but the smell did not seem to evaporate nearly as much as distilled when it dried.

Is your shower head not performing like it used to? Over time mineral deposits can build up which can cause the nozzles to squirt water in all directions or clog up completely, leaving you with poor water pressure or low flow.

Many shower heads have flexible rubber nozzles. You can dislodge mineral buildup in these nozzles by simply massaging each nozzle with your finger. You can also try gently scrubbing the nozzles with a toothbrush.

If you have a severe problem with limescale you can use a chemical limescale remover. Use the same methods as above, but take care to read the instructions as some materials can be ruined by the use of certain cleaners. Don’t soak for too long as these harsher chemicals will reduce the time it takes to dissolve deposits. You should also take care to rinse the showerhead completely before using the shower.

OK, 12 hours has passed…carefully remove the bag and dump the vinegar down the drain. If you want to clean your drain in the process, dump some baking soda down the drain before pouring out the vinegar and your drain will get cleaned as well. Once the vinegar is emptied, run the shower for a minute and let the vinegar rinse off (the smell will go away too). Within minutes your shower will work wonderfully and you’ll be so glad you tried this out!

Leave the shower head to soak for 30 minutes or overnight depending on how bad it is. If the shower head is made from brass, remove the bag after 30 minutes. The process can be repeated after you’ve rinsed the shower head if required.

If you find your shower head looking dingy, you’re losing spray power, or there’s random jets shooting all over, it’s probably time to clean your shower head. Even if you don’t have hard water, many people experience a build up of mineral deposits on their shower head after a while. Aside from making your shower head look dirty, these deposits can often times block the jet openings on the shower head preventing it from producing the desired spray. A good soak and scrub can eliminate this in just a few minutes. But, before reaching for a harsh, toxic chemical to clean your shower head, consider using a more eco-friendly cleaning method.

Use a soft cloth to polish the showerhead.[3] You can use a microfiber cloth or even a piece of flannel. Gently wipe the showerhead with the cloth until it is completely dry and there are no water spots.[4]

Post comment