Jan
30

How To Clean Shower Head From Limescale

Author redlaw    Category Shower Head     Tags , ,

What’s preventing you from making a key decision about shower head cleaning? Can it be your insufficient information regarding this subject ? Decisions are difficult to make whenever you feel crucial info is missing. Here is an an article I read concerning this subject and it really helped me decide.

It has all of the important troubles that need covered, lots of details and a list of things to be wary of. If one makes the incorrect decision because you didn’t have all of the info you needed it is going to be the wrong decision. I hope you’ll find this short article as beneficial for you as it was for me personally.

First slip a rubber band over the top of the showerhead. You may want to loop it around the shower arm once or twice so the plastic bag will stay in place. Then fill a plastic bag with white vinegar. Attach the bag to the showerhead by slipping the top of it underneath the rubber band. Wait one hour, then remove the bag and turn on the water to flush. Polish with a soft cloth.

Cleaning limescale from shower heads with white vinegar is a good way to remove all that nasty buildup! However, using vinegar can take a few hours to have the maximum effect, so you may prefer to use a specialist cleaning product, like Cif Bathroom Spray. Whichever product you use, make sure to follow the directions on the label and test it in a small area first. You will also want to rinse the product thoroughly before using the shower as normal.

Kettles, irons, showerheads: anything that comes into regular contact with hard water will inevitably lead to limescale. And as limescale builds up, showerheads get blocked, affecting the water flow and taking the shine off your shower. But descaling a shower head doesn’t have to be a difficult chore.

Occasionally when we lived in London, we would put a couple of bags of washing soda in the water tank in the loft (hot water) and let it sit there overnight then let it run through the system, it really kept the limescale down, I used to do all my washing with that water on a saturday or sunday morning, the old fart would swap the washing maching hoses over so the machine filled with hot water then put them back, id do all thecurtains and bedding and towels etc then our clothes and by that time the washing soda had gone and we could get baths etc

Residue can be scrubbed away with an old toothbrush. Focus on the nozzles, this is where most of the limescale build-up will be. Gently scrub over any residue and rinse with cold water. Do this until all the residue has gone.

This article shows you how to remove a tree stump without breaking your back. This method is safe and effective, and doesn’t require a lot of manual labor. But you have to be patient. The process can take several weeks.

Is your showerhead blocked by unsightly calcium deposits? “Hard” water, particularly from wells, can be high in calcium, magnesium, lime, silica and other minerals. Once hard water passing through a showerhead dries, it leaves behind deposits. This mineral buildup is both unattractive and problematic, as it can plug up the waterways and prevent your shower from flowing at full blast.

If your showerhead is clogged with years of mineral deposit build-up, it may need a thorough cleansing. Instead of reaching for harsh chemicals which may not only damage your showerhead, but may also be harmful to your health, try using vinegar instead. Read this article to learn two simple ways of cleaning your showerhead using vinegar and water.

If your shower head is clogged with years of limescale build-up, then it’s time for a thorough clean! There’s no need to reach for the harsh chemicals though as they could damage your shower head, try using vinegar instead. In this blog we share our top tips on how to descale a shower head.

The plastic bag needs to be secured to the shower head. Hold the top of the bag tightly around the shower head and tie a piece of string around it ensuring it’s tight and secure. Let go of the bag making sure it won’t fall off before stepping away.

The same hard water that clogs up your showerhead can leave off-white or brown spots on glass or ceramic surfaces, particularly in bathrooms and kitchens. Sinks, tubs, and glass shower walls and doors are all common places for mineral deposits to collect. Although it’s not as problematic as a clogged showerhead, it’s still unattractive. Rinsing the area with a solution that’s half vinegar, half water will eliminate such spots. The solution can be mixed in a spray bottle and sprayed directly onto the affected area. Wipe it away with a soft cloth or sponge. 

Secure the bag to the showerhead with a piece of string or twist tie. You can do this by holding the top of the bag tightly around the neck of the showerhead, and then tying a piece of string or a twist tie tightly around it. Carefully let go of the bag and make sure that it won’t fall off before stepping away.

Remove the shower head from the shower arm and place it in a bucket or other container deep enough so the head will be covered with the cleaning material. Use a rag to cover the nut connecting the shower head to the shower arm. With the rag in place use some locking pliers or a wrench to loosen the nut. For more information about removing your shower head, view how to remove/replace a shower head.

Removing the shower head to clean it is by far the most effective method, and is relatively easy. However, it is important that you use caution and monitor the process closely if you have a shower head with a designer finish like oil rubbed bronze, brushed nickel, or antique copper. Chrome will stand up to straight table vinegar with no problems, but if you have any other finish we recommend taking a cotton swab and testing a small, inconspicuous area for up to 30 minutes before you use this method on your whole shower head.

Fill the bag half way with vinegar and secure it to the shower head, a-la getting a fish at the pet store. Leave it for 12 hours (24 if it’s terrible) to soak and ensure that the entire shower head is immersed in vinegar. The vinegar will power through any limescale and you’ll notice a big difference in your shower’s performance.

You can prevent some buildup on the surfaces in your bathroom by keeping your shower and tub clean and by using a squeegee or dry towel to remove water after a shower or bath. Keeping the areas free of soap scum (residue left behind from certain types of soap combined with hard water deposits) will allow the minerals in your water to wash down the drain rather than stick to the soap scum.

To clean the filter screen, you may need to consult the shower head instruction manual. If you didn’t keep the manual, don’t panic! You can usually find it on the brand’s website or by contacting the customer service department.

OK, 12 hours has passed…carefully remove the bag and dump the vinegar down the drain. If you want to clean your drain in the process, dump some baking soda down the drain before pouring out the vinegar and your drain will get cleaned as well. Once the vinegar is emptied, run the shower for a minute and let the vinegar rinse off (the smell will go away too). Within minutes your shower will work wonderfully and you’ll be so glad you tried this out!

If you have a severe problem with limescale you can use a chemical limescale remover. Use the same methods as above, but take care to read the instructions as some materials can be ruined by the use of certain cleaners. Don’t soak for too long as these harsher chemicals will reduce the time it takes to dissolve deposits. You should also take care to rinse the showerhead completely before using the shower.

It is much trickier to remove a build-up of limescale from your pipework if it is still attached. For big problems, it may require the help of a plumber. But pouring vinegar or limescale remover into the pipe may help.

If there is one thing which is annoying it is having a shower with the water squirting out in every direction but down. The water is being squeezed through the holes in your showerhead which have become clogged with limescale and no matter how much you try to fix the problem by wiping the showerhead you find the situation only gets worse.

Scrub the showerhead using an old toothbrush, then turn the water back on. Focus on the base of the showerhead, where the water comes out, as this is the area that will get the most buildup. Turn the water back on again to flush more residue out. Keep scrubbing the showerhead and turning the water on until you cannot see anymore mineral residue.

Important Note! Harsh cleaning chemicals may damage your shower head and are not recommended for cleaning. (Read our blog post for some great money-saving tips for cleaning showers without expensive, harsh chemicals.)

Many brands make sprays specially designed to remove limescale. If you’ve got a heavy build-up that is proving resistant to vinegar, then your local supermarket will most likely stock an array of sprays that will do the job. However, be careful when using these that you don’t spray overhead and accidentally get chemicals in your eyes.

I use distilled vinegar, before I cottoned on to buying it in 5 gallon cartons from the cash & carry I used to use Sarsons distilled but it was very expensive. In an emergency I have used malt vinegar but the smell did not seem to evaporate nearly as much as distilled when it dried.

You can use these products to make the job a lot simpler:

Gather your supplies. One way to clean your showerhead is by taking it off the pipe and soaking it in vinegar. If you are unable to remove your showerhead, or if you simply do not want to, then click here. Here is what you will need for this method:

Use some tape, or if your shower head is small enough you can use a rubber band, and secure the bag around the shower head. Keep the tape on the plastic! Tape is really hard to remove from metal surfaces and may damage the finish of your shower arm or head.

The problem comes from hard water which is entering your home and aside from installing a water softener, you have few options when it comes to preventing the build up of limescale on and in your appliances. Hard water isn’t harmful, so showering under the water won’t hurt you, but you may find it irritating once the holes are blocked and you will find that shower hoses and shower heads will need to be replaced on a regular basis.

Instead I ignored it and this morning when my husband went in the shower, the hose exploded because of too much pressure and he got scalded (and the shower head is now broken and has to be replaced GRRRRRRR).

Post comment