Jan
20

How To Clean Shower Head Holes

Author redlaw    Category Shower Head     Tags , ,

Do you understand all of the ins & outs of shower head cleaning? Don’t you truly want to fully understand? Do you consider it a lot? Are you thinking about learning facts, trivia and other interesting info about it? We up-date our website frequently to bring you the most recent information. Don’t wait! Start clicking and reading now!

First slip a rubber band over the top of the showerhead. You may want to loop it around the shower arm once or twice so the plastic bag will stay in place. Then fill a plastic bag with white vinegar. Attach the bag to the showerhead by slipping the top of it underneath the rubber band. Wait one hour, then remove the bag and turn on the water to flush. Polish with a soft cloth.

You can use these products to make the job simpler:

If you have a severe problem with limescale you can use a chemical limescale remover. Use the same methods as above, but take care to read the instructions as some materials can be ruined by the use of certain cleaners. Don’t soak for too long as these harsher chemicals will reduce the time it takes to dissolve deposits. You should also take care to rinse the showerhead completely before using the shower.

You’ll save several dollars by not purchasing unnecessary specialty cleaners. And given that it’s all natural, there are no harsh chemicals or fumes. You can even use it to clean children’s bedrooms and bathrooms with no additional concerns. 

Don’t use baking soda. Sometimes it will clump up if there’s water in your showerhead. Just use the vinegar. It’s the best way. If you need to, flush out the showerhead with hot water and repeat the process until it’s clean. It may take a few times if you have mineral build up. It’s especially bad with well water.

Use some tape, or if your shower head is small enough you can use a rubber band, and secure the bag around the shower head. Keep the tape on the plastic! Tape is really hard to remove from metal surfaces and may damage the finish of your shower arm or head.

If you have a fixed shower head, make up the same solution of distilled white vinegar and water and half fill the plastic bag. Place the bag over the shower head, ensuring the whole head is submerged. Tie the bag securely on to the pipe behind the head with an elastic band or some hard-wearing string. Again, leave it overnight, then pour some fresh, soapy water over it to rinse it.

Keeping on top of the cleaning of your showerhead is important. The process of soaking in vinegar should be repeated every week during your general bathroom clean. This will mean that the problem will not have a chance to take hold. Once the initial clean has been done, a few minutes of soaking should be enough to keep on top of it if done regularly.

Begin this how to clean showerheads project by unscrewing the showerhead by gripping the shower neck with a pipe wrench (as shown), grabbing the nut on the showerhead with the adjustable pliers and turning pliers counterclockwise until the nut loosens. Protect the finishes on the showerhead and wall pipe by wrapping them with a cloth.

This article shows you how to remove a tree stump without breaking your back. This method is safe and effective, and doesn’t require a lot of manual labor. But you have to be patient. The process can take several weeks.

First, make sure to avoid contact with the eyes. If any vinegar gets in your eyes, promptly rinse the entire eye with fresh water until the sting has completely dissipated. Also, although it’s safe to use vinegar to clean areas where children play, you will want to do so when they are not present. Like adults, children should not be consuming vinegar in any way. 

Important Note! Harsh cleaning chemicals may damage your shower head and are not recommended for cleaning. (Read our blog post for some great money-saving tips for cleaning showers without expensive, harsh chemicals.)

The problem comes from hard water which is entering your home and aside from installing a water softener, you have few options when it comes to preventing the build up of limescale on and in your appliances. Hard water isn’t harmful, so showering under the water won’t hurt you, but you may find it irritating once the holes are blocked and you will find that shower hoses and shower heads will need to be replaced on a regular basis.

If there is one thing which is annoying it is having a shower with the water squirting out in every direction but down. The water is being squeezed through the holes in your showerhead which have become clogged with limescale and no matter how much you try to fix the problem by wiping the showerhead you find the situation only gets worse.

If you don’t feel up to the task of removing the shower head to clean it, or for some reason you cannot remove your shower head, you can still effectively clean the mineral buildup off your shower head while it is on the shower arm. Be aware, however, that usually this method will take quite a bit longer since you don’t heat the vinegar.

Just fill a small plastic bag half full with white vinegar and attach the bag over your showerhead with a rubber band. Leave the bag in place for an hour or two. Then remove the bag and scrub the showerhead with an old toothbrush or rag. Your showerhead will look and function like new!

Post comment